Zugg Software :: View topic

Newbie Joined: 22 Apr 2004 Posts: 2

What port does ACXServer and ACX use to communicate. Im thinking about writting a decal plugin version of ACXServer and I will need that information.
Im not at home to see if there is a way to configure the port ACXServer and ACX use to communicate.

Newbie Joined: 22 Apr 2004 Posts: 2

Nevermind I see it in the document. Missed it first time through.

Beginner Joined: 28 Aug 2003 Posts: 12 Location: USA

quote:
Originally posted by bluehawk

Zugg,

Thank You!!!

It even fixed Auto Calibrate for me that hasn't worked on my PC in over one year.

Bluehawk

Same here, auto calibrate works again! Many thanks!

quote:
Originally posted by Entropathic

These settings appear to be working on Frostfell:

Location: 005DC4B0
Offset: (NULL)
Heading: 0075E798

Direct mode checked.

Thanks, Zugg.

Those are the settings I'm getting on Solclaim.

The program drops false death markers frequently, but this appears to happen only when I have Decal (latest version) running. Not a major problem for me.

Thanks for the fix!

Posted: Sun Apr 25, 2004 2:11 pm

Hi I just thought I would add that Trekman's coords posted for Solclaim are working quite well for me too, also on Solclaim.

I have noticed however the the position, (but not the heading), seems to actually be the point of view position. If you zoom out and rotate around the position changes. This might explain the different structures you are seeing at the given addresses.

The other thing I noticed was the I lost tracking when I went further West than 98W on the Caul once I crossed 98W heading back east again the tracking returned.

Posted: Mon Apr 26, 2004 6:28 pm

Yes, tracking never works beyond 98W. This has always been a limit even when tracking used to work.

Thanks for the comment about the view position. That *definitely* explains the different memory structure. The view position has all sorts of directional cosines stored with it, and the view position has always been somewhat flaky (I've tried to use it before in the past).

That makes me think that they actually removed the old stable character position record so all that is left is the view coordinates. But with this additional info, I might be able to refine things a bit. I just need to go look up some old geometry stuff to see what I can figure out.

Newbie Joined: 26 Apr 2004 Posts: 1

005CD404 seems to work on Thistledown as well..

I have portaled all over and I still seem to be tracking

Newbie Joined: 28 Apr 2004 Posts: 2 Location: USA

Does anyone play on Harvestgain? I am getting 005FF188 for the location and 0075E798 for the heading. The heading works perfectly, but the location jumps around within a certain distance of where I am actually standing. This is functional, but would be better if the location was stable. Has anyone had better luck?

Thanks!

Newbie Joined: 08 Apr 2004 Posts: 9 Location: Austria

Asile, have you tried Trekmans memlocs? For me they are working fine on Harvestgain too.
Location: 005CD404
Heading: 0075E798
Direct: ON
Offset: empty

Newbie Joined: 17 Nov 2002 Posts: 3 Location: USA

This may not be related .. but did anyone notice that part of the databases (Worlds) are located on one server (during the recent Turbine server move).. and other worlds/databases are located on another server. This may explain why some Worlds have the same address ... maybe ..?

Novice Joined: 14 Aug 2002 Posts: 40 Location: USA

quote:
Originally posted by byteful

FYI All is Well here in LeafCull Tracking Trails are not working, but for me that isnt even worth working on [IMHO]

Thx again

OOops My Bad Leafcull is working great wasn't paying close enough attention

Newbie Joined: 02 May 2004 Posts: 1

OO! OO! OO!

Auto Calabration just worked for me for the first time in several years. But not until I ran far away from my allegiance mansion. Which I did because I had previously tried to auto calabrate with a failure, and then I manually calabrated with numbers from this post which finaly connected but had me stuck in a building, so I thought huh? and ran away to try auto again.

So is there something funny about the landblock surrounding houses/mansions that causes Auto to fail? Cause that seems to be where I have always tried to calabrate in the past always getting a failure. Or was it simply putting the "almost working" manual numbers in that got it to connect and auto calabrate correctly?

Or should I run to the nearest casino and give a tug on some one armed bandits? :)

Newbie Joined: 28 Apr 2004 Posts: 2 Location: USA

quote:
Originally posted by QuickWeasel

Asile, have you tried Trekmans memlocs? For me they are working fine on Harvestgain too.
Location: 005CD404
Heading: 0075E798
Direct: ON
Offset: empty

[8] Ah! Success! Yes, these values are stable on HG. Thanks! [8D]

Posted: Wed May 12, 2004 10:37 pm

New patch and I just ran the auto calibrate and a very quick test looks like it worked.

Location 005DF4C0
Heading 007617B0