Zugg Software :: View topic

Newbie Joined: 25 Aug 2004 Posts: 7

What Im trying to do here is have a macro that will toggle a set of actions:

When its clicked it sets a variable @aw to 'on' and issues the command 'autoloot on' plus it starts performing an alias called 1mg every 4 seconds. When I toggle the macro off I want to set the @aw to 'off', issue the command 'autoloot off' and stop the loop.

Heres the code i have so far.

#if (@aw = "on") {
autoloot off
mgcount=300
aw = "off"
} {
autoloot on

aw = "on"

mgcount=1

#while (@mgcount < 300) {
1mg
#add @mgcount+1
#wait 4000
}
}

But this ends up sending most of the above to zmud as code. Where am I going wrong?

thanks

Enchanter Joined: 10 Oct 2000 Posts: 698

#IF (@aw = "on") {autoloot off;#T- mg_alarm;aw="off"} {autoloot on;#VAR mgcount 1;#ALARM mg_alarm *4 {1mg;#IF (@mgcount = "300") {#T- mg_alarm};#ADD mgcount 1};aw="on"}

Newbie Joined: 25 Aug 2004 Posts: 7

Its not quite working.

The first click with the autoloot off starts the loop ok. The second click doesnt disable it and is sent to the mud as

#if (on = on) {
autowake off
} {autowake on;aw = on}

MASTER Joined: 28 Nov 2000 Posts: 4817 Location: USA

Mr Kent's #IF commands are correct. You probably left out one or more }'s.