Register to post in forums, or Log in to your existing account
 

Setting up the automapper. [[kbmapper]] 
The automapper in zmud isn't always as automatic as we want it to be so below are some general guidelines for setting up the mapper for most muds. Due to complexities with Muds like Achaea and Aetolia There will be a companion guide for them following along shortly.

AUTO-CONFIG:
For the majority of the muds out there automatic configuration should always be the first thing to do. However it will overwrite any manual config settings you have made so make this your first step.

1. Goto a fairly unique room in on your mud with a door-less connecting room. Usually newbie schools are NOT a good place to set up the mapper as the help lines in room title/desc's and mob responses can sometimes throw the mapper off. Also make sure there are NO refrences to exit dirs in the room desc/contents.

2. Open the mapper, and click the third map icon (MAP mode). You should get a new configuration window if not goto Config->"new mapper config".

2a. Enter a valid direction to move in and press next.

2b. Select all the options that apply Name, Desc, and Exits. Desc should be unchecked if your mud does not have room desc.
If your mud doesn't show Room Name or Exit info Ask for help on the Zmud General forum for what to do providing mud output of you walking around using your exits command etc.

2c. click next and Verify that everything is color coded correctly in the window.
Room name is blue,
Desc (If there is one) is green,
And make sure your exit line info is red.
And that it is properly capturing all the exit words.

2d. If Everything matches click finish and congrats you have just set up the automapper!. If not ask for some help here!

--------------------------------

Now we get into the nitty gritty part of setting up the mapper

1. Some muds have changing room Descs depending on the time or weather or other Info. So we want to match on the room name instead. I think this is the default option for new maps.
In the mapper select
Config->configuration settings->Speedwalking
In Automatic step confirmation select
Match Room Name

1a. If your roomname is on its own line most of the time and you have occasion where its after your prompt or something else might pop up in front of it.
Config->Configuration Settings->Configuration->Room Name
Uncheck Roomname at start of line
Check roomname at end of line
If there might be stuff after the roomname uncheck both.

2. Now I recomend for most of the muds out there to use SLOW walking especially if your mud has things like balance, limits on how far/fast you can move at a time etc. SLOW walking mode makes problems and making sure your postition is correct that much easier to fix.
Config->Configuation Settings->Speedwalking
and in Speedwalking mode select
SLOW walking
If there is a limit on how often/fast you can move at a time increase the step delay (1000=1 second, 500=1/2 second) From most of the topics in the forums 750 seems to be a good default value.

3. The most common problem with the mapper not working correctly is an incorrect prompt pattern. So Adjust this value Accordingly.
----------------------------------------

That should be REALLY close on getting your mapper working correctly now for some triggers to help keep your position updated.

#NODIR clears the next command in the QUE here are some examples of properly used nodirs enter these at the command prompt (where you type mud commands) and hit enter making sure to adjust the pattern to fit your mud, remember they are just examples.

#TRIGGER {^There is a door there.} {#NODIR}
#TRIGGER {^You can't go that way.} {#NODIR}
#TRIGGER {^You need to swim to get there.} {#NODIR}

#NOMAP will keep the mapper from parsing(using) certain lines. For the most part thinking that it is the room name.

#TRIGGER {^You fly %t} {#NOMAP}
#TRIGGER {^You climb %t} {#NOMAP}
#TRIGGER {^Chats:} {#NOMAP}

---------------------------------

#PAUSE, #STOP, #STEP, #OK

These are slowwalking commands and vary in use depending if the mapper is open or closed etc. and trust me they CAN and WILL give you hell unless you know how they work. Whenever using slowalking commands it is best to use them in a seperate class that can be turned off when not needed otherwise normally trying to spam walk manually through an area (I.E. running from a fight) will mess up your position. There is a very detailed article on speedwalking and using these commands at Http://www.zuggsoft.com/library/speedwalking.htm

-----------------------------------

#TAG

For most muds you won't have to tag anything to get the mapper going but then there are some muds that format things differantly and you will have to use #TAG remember to RECONFIGURE your mapper if you add a #TAG trigger and also remember that you will have to go back and replace any manual config changes that you have made.

 User comments 
Tech: Tue Oct 25, 2005 2:31 pm    

Excellent article... I have a little experience with the mapper now and if I'd read this article before I would have avoided quite a few hiccups. A good reccomendation for everyone with mapper concerns.
Viewer Comments [1 - Post your comments]

Jump to:  

© 2009 Zugg Software. Hosted by Wolfpaw.net