Zugg Software :: View topic

Newbie Joined: 16 Mar 2016 Posts: 2 Location: Hungary

Hi there!

I'm done with about 3k of rooms on my MUD properly, but after an unknown effect mapper absolutely died, don't make new rooms and don't follow my steps in follow mode.
It's not the first issue, i used it with an other MUD, there happens it twice. After a time it works no more.
I have no time and spirit to re- and re- and remake my maps continously after lots of work.

Can you help me any way?
Thx!
Spikk

Posted: Wed Mar 16, 2016 6:26 pm

I am guessing you made some triggers to aide you in the process, no?
If so, then you would have to reconfigure the mapper.

I find that prompt suppression is an easy way to foul up the mapper.

Newbie Joined: 16 Mar 2016 Posts: 2 Location: Hungary

Thx, Shalimar!
I'll try to disable all of my triggers around mapper functions to see, what can it do alone after reconfigure.
I use some #nodir, #ok and #tag (prompt and exit) to help automapper, and yes, i always reconfigure if something go wrong. My prompt is complex with a > on the end, it's ok for configure wizard.
I will do my best and report the effect tomorrow.

Posted: Wed Mar 16, 2016 7:24 pm

you can also use disabling setting to narrow down all your settings until you figure out just which one is causing you trouble, assuming its not a mapper related setting.